[an error occurred while processing this directive]



Range: M |MX | Z | AA | IRM-301 | Autosorter | Cocoon | Coal Analyzer

[Products]

IRM-301 : Moisture Analyser Balance

ANAMED's Moisture Analyser Balance - IRM-301 determines the moisture content of a wide range of materials by the dry-and-weigh method. In a significant improvement over heat lamps, the IRM-301 uses a unique flat plate ceramic heater for faster heating. It has an in-built software that controls the rate of heating and does all the calculations that are relevant on wet basis or dry basis. Pharmaceutical and food industries, as also agricultural and research institutions will find this to be an effective tool for faster analysis of moisture content in various products.

Salient features of IRM 301 Moisture Balance are:

  • Saves time and improves accuracy
  • Flat ceramic element deeply and evenly heats the sample
  • Precise heater temperature control
  • Automatic detection of dry-end point
  • Self explanatory keypad for entering analysis parameters
  • Bright alphanumeric vacuum fluorescent display
  • Displays useful parameters even during the drying process with the touch of a key
  • Helps study of drying pattern of the sample.
Technical Specifications

  Measurement Method :

Infrared radiation and detection of weight loss.

  Heat source :

 Far Infrared ceramic heater.(325 watts).

  Temperature Setting :

 Ambient to 200 0C in 10 C steps

  Temperature control :

Platinum temperature sensor (pt-100)

  Weighing capacity :

 100 grams.

  Sensitivity :

 0.001 gram

  Working Range :

 0.5 % to 99.5%

  End analysis modes :
a) Time -out (1 to 120 min)
b) Slope (costant weight ).
  (0.05% to 9.99% of the initial weight over
  0.5 to 9.99 min.

  Results readability :

 0.01% or 0.001 grams.

  Units of results :

 Moisture in grams and percentage (dry and wet basis), solids in grams and percentage.

  Printer (optional) :

 80 column dot matrix.

  Power requirements :

 230 V ± 10% A.C. , 50Hz, 400watts.

  Standard accessories :
i) switch mode power supply.
ii) Al. disposable pans
iii) Quartz sample pads.